ROME PLOW TCW OT SERIES

OT – Series Rigid Frame Tandem Disk Harrow

For use with tractors in the 85 – 200hp range.

OT SERIES
OT SERIES

FEATURES:

  • Mainframe and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
  • Weld-on gang standards for optimum strength and rigidity assure precise gang alignment.
  • Hydraulically controlled transport assembly with 4 wheel and tire assemblies for lower ground pressure.
  • Equipped with oil bath dual tapered roller bearings.
  • Spring-loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.
  • Fixed gang angle 18 degrees for both front and rear gangs.
  • Adjustable height on hitch clevis allows for straight-line pull and helps prevent gouging of front gangs.
  • 9″ (229mm) ground clearance with 24″ (610mm) diameter disk blades.
  • Up to 198lbs (90kg) of harrow weight per disk blade.

Standard Equipment:

  • 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.
  • Oil bath bearings.
  • Disk type balk buster.
  • Adjustable disk blade scrapers.
  • Heat-treated alloy steel gang axles.
  • Heavy-duty cast steel spacer spools.
  • Bearing wear plates.
  • Cylinder rod stops for positive depth control adjustment.
  • The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.
  • Wheel hubs have 8-bolt, 6000lb (2722kg) slip-in spindles on the center frame and wings with two tapered roller bearings on each hub that is dust and moisture-protected.
  • Four 12Lx15 farm highway service tires for maximum floatation and tire capacity.
  • Transport locks pin wheels in the raised position for transport.
  • Two heavy-duty gang wrenches.
  • Drawbar jack stand and safety chain.

Optional Equipment:

  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
  • Rear hitch assembly.
  • Front and rear furrow fillers.
  • Extra heavy-duty bearing wear plates with 1/4″ (6mm) hard plate overlay.
  • Light group.

Description

Introducing the OT rigid frame tandem disc harrow from 12′ to 18′ in width of cut.

Wheel Offset Disk Harrow For use with tractors in the 85 – 200hp range.

Reviews

There are no reviews yet.

Be the first to review “ROME PLOW TCW OT SERIES”

Your email address will not be published. Required fields are marked *