top of page

4850 SERIES DISC HARROW

Series 4850 Wheel Offset Disk Harrow - for use with tractors in the 304 – 542 hp range.

Features

  • Both rigid and folding models are designed to give excellent uniform tillage in all stubble-plowing situations.

  • Main frame and gang carriers are constructed of high-strength tubular steel that is welded for maximum strength and durability.

  • Hydraulically controlled transport assembly with cylinder transport locks to pinwheels in raised position to safeguard implement from accidentally falling during transport.

  • Transport position allows approximately 12” (305mm) ground clearance.

  • Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.

  • Equipped with Timken dual tapered roller bearings.

  • Depending on the model, the disk blade can weigh up to 462 lbs (210kg), with an average of 444 lbs (201kg).

  • Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.

Specifications

*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) shallow concavity disk blades.

  • Heat-treated alloy steel gang axles.

  • Heavy-duty fabricated steel spacer spools.

  • Bearing wear plates.

  • Furrow filler disk group.

  • Adjustable disk blade scrapers.

  • Wheel hubs with 2 tapered roller bearings on each hub are dust- and moisture-protected.

  • New industrial tires – 4 each. 4850-35 and 4850-49-WF: 12.5L x 15. 4850-53-WF: 16.5L x 16.1.

  • Hardened pins and bushings.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • Cylinder rod stops.

  • Drawbar jack stand and safety chain.

  • 32” (813mm) diameter x 3/8” (10mm) thick; dura-faced cutout (notched) shallow concavity disk blades.

  • Heavy duty bearing wear plates.

  • Rear hitch assembly.

  • Rear hitch hydraulic group.

bottom of page