top of page

2850 SERIES DISC HARROW

Series 2850 Wheel Offset Disk Harrow - for use with tractors in the 181 – 390 hp range.

Features

  • Uniquely designed harrow is available in five rigid and four wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all light-plowing applications.

  • Mainframe, wings, and gang carriers constructed of tough high-strength tubular steel for maximum strength and durability.

  • Hydraulically controlled transport assembly with cylinder transport locks to pinwheels in raised position to safeguard implement from accidentally falling during transport.

  • 10” (254mm) ground clearance with standard 28” (711mm) diameter disk blades.

  • Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.

  • Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades.

  • Equipped with Timken dual tapered oil bath roller bearings.

  • Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost.

Specifications

*Engine horsepower is suggested ranges and varies according to soil conditions and weight added to the scraper.
NOTE: This scraper requires hydraulic control. One rear tractor hydraulic circuit required for scraper operation. Additional hydraulic circuits required for tilt option and each attachment.

Standart Equipment

Optional Equipment

  • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) shallow concavity disk blades.

  • Heat-treated alloy steel gang axles.

  • Heavy-duty fabricated steel spools.

  • Heavy duty bearing wear plates.

  • Tapered gang assemblies.

  • Adjustable disk blade scrapers.

  • Wheel hubs with 2 tapered roller bearings on each hub are dust- and moisture-protected.

  • Four dual 12L x 15 farm highway service tires for transporting, plowing, and turning.

  • Hardened pins and bushings on all pivot points.

  • Drawbar jack stand and safety chain.

  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.

  • 28” (711mm) diameter x 5/16” (8mm) thick; cutout (notched) front and smooth (round) rear shallow concavity disk blades.

  • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) front and rear shallow concavity disk blades.

  • 30” (762mm) diameter x 5/16” (8mm) thick, disk blades available in all 28” (711mm) configurations.

  • Rear hitch assembly.

  • Rear hitch hydraulic group.

  • Extra heavy-duty wear plates with 1/4” (6mm) hard plate overlay.

bottom of page