Disc Harrow 240 Series / Arado de Discos Serie 240 / Дисковая Борона Серия 240

Disc Harrow 240 Series

Double Offset Tandem Disk Harrow – 240 Series

Disc Harrow 240 Series is good for use with tractors in the 275 – 500hp range.

Features

  • Four gauge wheel assemblies provide a consistent depth of penetration on all four gangs while providing accurate leveling.
  • Double offset tandem disk harrow series is ideally suited to provide excellent uniform tillage results in all plowing applications
  • Mainframe and gang carriers constructed of tough high strength tubular steel, welded for maximum strength and durability.
  • Transport position allows for approximately 10” (254mm) of ground clearance with standard 24” (610mm) diameter disk blades.
  • Equipped with reliable, heavy-duty, dual tapered 9” (229mm) self-aligning oil-bath gang roller bearings with cast housings.
  • Bearing wear plates help protect the bearing housing from wear caused by abrasive soils extending their service life and decreasing cost.
  • Up to 8” (204mm) depth of penetration.
  • Tapered gang assemblies mounted on rock flex standards.

Specifications of Disc Harrow 240 Series

9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with self-aligning oil bath dual tapered roller bearings.

Standard Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades.
  • Heat-treated alloy steel gang axles.
  • Heavy-duty cast steel spacers.
  • Eight 12.5L x 15 – F1 highway service tires for easy plowing, turning, and transporting.
  • Heavy-duty 8 bolt wheel hubs with 2 tapered roller bearings on each hub with moisture protection.
  • Tandem walking beam transport.
  • Four gauge wheel groups.
  • The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.
  • Hardened pins and bushings on all pivot points.
  • Adjustable disk blade scrapers.
  • Rock flex standards.
  • Drawbar jack stand.

Optional Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades.
  • Rear hitch assembly.
  • Rear hydraulic group.
  • Heavy-duty bearing wear plates with 1/4” (6mm) hard plate overlay.
  • Light group.

Capture.PNG

240Series1.jpg

240Series2.jpg

240Series3.jpg

Our experienced sales staff is ready to help you!

For all your Rome Plow sales needs, contact us today!

Advertisements

Leave a Reply