Disc Harrow 185 Series

Flex-Wing Tandem Disk Harrow – 185 Series

Disc Harrow 185 Series is good for use with tractors in the 200 – 400hp range.

Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
Weld-on gang standards for optimum strength and rigidity assures precise gang alignment.
Hydraulically controlled transport assembly and wing fold up.
Wing fold mechanism allows wings to float up and down 5° when disk plowing.
Equipped with oil bath dual tapered roller bearings.
The spring-loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.
Fixed gang angle of 18° for both front and rear gangs.
Adjustable height on hitch clevis allows for straight-line pull and helps prevent gouging of the front gangs.
9” (229mm) ground clearance with 24” (610mm) diameter disk blades.
185lbs (84kg) of harrow weight per disk blade.

9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken oil bath dual tapered roller bearings.

24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.
Tapered gang assemblies.
Disk type balks buster.
Adjustable disk blade scrapers.
Heat-treated alloy steel gang axles.
Heavy-duty cast steel spacer spools.
Bearing wear plates.
Cylinder rod stops for positive depth control adjustment.
The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.
Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that is dust and moisture protected.
Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity.
Transport locks pin the wheels in a raised position for transport.
Two heavy-duty gang wrenches.
Drawbar jack stand.

24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades.
Rear hitch assembly.
Rear hydraulic group.
Extra heavy-duty bearing wear plates with 1/4” (6mm) hard plate overlay.
Light group.