Disc Harrow 185 Series / Arado de Discos Serie 185 / Дисковая Борона Серия 185

Disc Harrow 185 Series

Flex-Wing Tandem Disk Harrow – 185 Series

Disc Harrow 185 Series is good for use with tractors in the 200 – 400hp range.

Features

  • Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
  • Weld-on gang standards for optimum strength and rigidity assures precise gang alignment.
  • Hydraulically controlled transport assembly and wing fold up.
  • Wing fold mechanism allows wings to float up and down 5° when disk plowing.
  • Equipped with oil bath dual tapered roller bearings.
  • The spring-loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.
  • Fixed gang angle of 18° for both front and rear gangs.
  • Adjustable height on hitch clevis allows for straight-line pull and helps prevent gouging of the front gangs.
  • 9” (229mm) ground clearance with 24” (610mm) diameter disk blades.
  • 185lbs (84kg) of harrow weight per disk blade.

Specifications for Disc Harrow 185 Series

9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken oil bath dual tapered roller bearings.

Standard Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.
  • Tapered gang assemblies.
  • Disk type balks buster.
  • Adjustable disk blade scrapers.
  • Heat-treated alloy steel gang axles.
  • Heavy-duty cast steel spacer spools.
  • Bearing wear plates.
  • Cylinder rod stops for positive depth control adjustment.
  • The hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach the rear of the tractor.
  • Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that is dust and moisture protected.
  • Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity.
  • Transport locks pin the wheels in a raised position for transport.
  • Two heavy-duty gang wrenches.
  • Drawbar jack stand.

Optional Equipment

  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
  • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades.
  • Rear hitch assembly.
  • Rear hydraulic group.
  • Extra heavy-duty bearing wear plates with 1/4” (6mm) hard plate overlay.
  • Light group.

Capture

185Series.jpg

Our experienced sales staff is ready to help you!

For all your Rome Plow sales needs, contact us today!

 

Advertisements

Leave a Reply